Interworld Electronics SeaI/O-570 module
27 April, 2011 | Supplied by: Interworld Electronics and Computer Industries
Modbus Distributed I/O modules now include the SeaI/O-570 multifunction module that has a combination of analog and digital I/O.
Adlink ASD industrial-grade solid state drive series
27 April, 2011 | Supplied by: Micromax Pty Ltd
Adlink has released the ASD series of industrial-grade solid state drives, designed to meet the needs of applications in severe environments.
National Semiconductor clock jitter cleaner range
25 April, 2011 | Supplied by: Arrow Electronics Australia Pty Ltd
National Semiconductor has introduced a family of clock jitter cleaners featuring what it claims is the industry’s lowest phase noise and RMS jitter performance: 111 femtosecond (fs) from 12 kHz to 20 MHz and a wideband noise floor of -162 dBc/Hz at 184 MHz output.
Diodes APX4558 low-noise op amps
25 April, 2011 | Supplied by: Arrow Electronics Australia Pty Ltd
With a low-input noise performance of 8nV/√Hz at 1 kHz, the APX4558 dual-channel op amps from Diodes meet demands for higher-performance audio without an increase in BOM cost.
International Rectifier IR3550 PowIRstage device
24 April, 2011 | Supplied by: Avnet Electronics Marketing
International Rectifier has introduced the IR3550, the first in a family of integrated PowIRstage products that deliver higher efficiency and better thermal performance.
TDK-EPC Epcos BR6000-HD power controller
23 April, 2011 | Supplied by: Arrow Electronics Australia Pty Ltd
TDK-EPC has extended its range of power factor controllers with a heavy-duty version of the Epcos BR6000 device. It is suitable for applications that place high demands on electromagnetic compatibility (EMC) and the controller can also be used in a temperature range of -40 to +80°C.
International Rectifier dual-power MOSFET range
20 April, 2011 | Supplied by: Avnet Electronics Marketing
International Rectifier has introduced the company’s first family of radiation-hardened (RAD-Hard), dual-power MOSFETs in a compact hermetic LCC-6 surface-mount package for low-power, lightweight space applications requiring a small footprint such as satellite payload power systems.
Linear Technology LTC2145 low-power ADC range
19 April, 2011 | Supplied by: element14
Linear Technology has introduced a family of ultralow-power 14 and 12 bit, 25 to 125 Msps analog-to-digital converters that dissipate less than 1 mW per mega sample per second from a 1.8 V supply.
Microchip PIC16LF190X microcontrollers
18 April, 2011 | Supplied by: Microchip Technology Australia
Microchip has expanded its 8-bit segmented LCD microcontroller family with five devices - the PIC16LF1902/3/4/6/7 (PIC16LF190X).
Kontron KTLX800/pITX single board computer
18 April, 2011 | Supplied by: Kontron Australia Pty Ltd
A 2.5″ Pico-ITX SBC KTLX800/pITX, featuring the AMD Geode LX800 processor, combines maximum cost and power efficiency with interfaces tailored to the needs of industrial automation and test and measurement.
Vishay PLTT thin film resistor
16 April, 2011 | Supplied by: Braemac Pty Ltd
Vishay has introduced a precision, low-TCR thin film resistor offering a wide operating temperature range of - 55 to + 215°C.
austriamicrosystems AS5050 magnetic rotary encoder IC
13 April, 2011 | Supplied by: Arrow Electronics Australia Pty Ltd
austriamicrosystems has launched the AS5050 10-bit magnetic rotary encoder IC for contactless position sensing, featuring what is claimed to be the lowest power consumption and smallest size.
National Semiconductor LM5045 and LM5046 full-bridge PWM controllers
12 April, 2011 | Supplied by: Arrow Electronics Australia Pty Ltd
National Semiconductor has introduced what it claims is the first full-bridge pulse width modulation controllers to integrate all four primary-side bridge MOSFET gate drivers.
Wireless measurement and data acquisition
12 April, 2011 | Supplied by: Kontron Australia Pty Ltd
The embedded developer b-plus was looking to migrate its XScale-based visualisation client, which is designed to be the mobile HMI for Zigbee measured data, to an Atom-based platform, to benefit from enhanced graphics and processing performance, easier long-term scalability in performance and openness in software development. One major question needed to be answered: what is the most efficient hardware platform for this application?
Kemet chip capacitor arrays
11 April, 2011 | Supplied by: Ampec Technologies Pty Ltd
Kemet has expanded its ceramic chip capacitor array range with a two-capacitor array in EIA 0508 case size, available for both commercial and motor vehicle-grade applications in C0G and X7R dielectrics.
