Lantronix EDS1100/EDS2100 hybrid servers
13 August, 2010 | Supplied by: Soanar Limited
Lantronix has introduced the EDS1100 and EDS2100 hybrid ethernet terminal/multiport device servers. They deliver a high level of intelligence and safety and are available with Linux and IPv6 or Lantronix’s Evolution OS.
Hammond Electronics 1550Z thick wall IP66-sealed boxes range
13 August, 2010 | Supplied by: Hammond Electronics Pty Ltd
The 1550Z range of thick wall (3 to 4 mm depending on size) IP66-sealed boxes are suitable for use in applications where impact protection and environmental sealing are primary requirements.
Lektronics 19" subracks
08 July, 2010 | Supplied by: Lektronics Pty Ltd
Lektronics has complete subrack solutions available, including standard or custom kits. Standard-width sizes include full 19″ (84 HP) wide, ¾ 19″ (63 HP) and ½ 19″ (42 HP).
Keystone miniature lithium button cell retainer
02 July, 2010 | Supplied by: NPA Pty Ltd
A miniature lithium button cell retainer, suitable for high-density PCB packaging, has expanded Keystone’s range of surface-mount battery retainers for SMT applications.
Teko key fob enclosures
17 June, 2010 | Supplied by: Soanar Limited
Teko Enclosure Solutions has introduced a range of key fob enclosures for electronic applications.
Satcam QCJ5 machine
21 May, 2010 | Supplied by: Satcam & RTD Circuit Design
The QCJ5 machine, with its third access motion control, can repair circuit boards, de-panel or create panels and housings.
Fluke Linkrunner Pro
19 May, 2010 | Supplied by: TechRentals
Troubleshooting or just maintaining a network can be time consuming and costly. Fluke Linkrunner Pro combined with Fluke Etherscope is an easy and non-expensive way to not only troubleshoot front-line IT problems and in-depth LAN analysis but also determine the quality of a LAN with RFC2544 tests which include latency, loss and BERT throughput.
NPA nylon hole plug and snap bushing
11 May, 2010 | Supplied by: NPA Pty Ltd
NPA has released a nylon hole plug and snap bushing to fill a gap in its range of hole sizes.
Die-cast aluminium enclosures
12 November, 2009 | Supplied by: http://www.hammondmfg.com/1550.htm
The Hammond Electronics 1550 range of general-purpose and IP66 die-cast aluminium enclosures is said to provide robust mechanical protection and good EMC attenuation levels.
Server racks
10 November, 2009 | Supplied by: Power Parameters Pty Ltd
Citec HDHC integrated server racks, incorporating the dual Citec rack fan with control display panel, are designed for use in high-power-density computer rooms.
POS system
10 November, 2009 | Supplied by: ICP Electronics Australia
The EP-265 series, 250 cd/m² XGA all-in-one POS system features a free-to-adjust pole stand for second displays. The pole stand allows up, down, left and right (-45 to 45°) angle adjustments. The second display can face towards the customers for the best view and the main monitor can be adjusted within a range of 20-90°.
Lithium battery holders
10 November, 2009 | Supplied by: NPA Pty Ltd
Keystone Electronics has introduced 1/3N lithium battery holders for surface or through-hole mounting.
Prototype boards
10 November, 2009 | Supplied by: Glyn Ltd
SchmartBoard’s PCBs, available from Glyn High-Tech, are said to be the easiest electronic circuit prototyping system on the market.
PCB terminal blocks
20 October, 2009 | Supplied by: M Rutty & Co Pty Ltd
M Rutty has released a range of high-power terminal blocks and connectors enabling high current inputs and outputs to be connected to a printed circuit board.
Aluminium enclosures
15 October, 2009 | Supplied by: Hammond Electronics Pty Ltd
Hammond Electronics has launched the initial six sizes in its 1550 family, a range of industry standard sizes, small die-cast aluminium enclosures that provide robust mechanical protection and good EMC attenuation.
